Drip Tray for STEPHILL Generator SE10000 | SERPRO | Drip Trays for STEPHILL Generators
100 Litre Square Generator Drip Tray
Durable, low-profile containment for generators, plant and equipment
Capacity: 100 Litres
Recycled Polypropylene
External: 100 × 100 × 12 cm
Min. Internal: 91.5 × 91.5 × 12 cm
Product Overview
Keep spills under control with this robust, 100 litre square drip tray. Built from recycled polypropylene, it’s a practical, eco-conscious solution for capturing leaks and drips from generators, plant and static equipment. The low 12 cm profile makes positioning easy while providing generous containment capacity for oils, fuels, coolants and water.
Compatible fit: STEPHILL SE10000 generator footprint 84 × 58 cm sits comfortably within the tray’s minimum internal dimensions of 91.5 × 91.5 × 12 cm.
Key Features
-
- 100 litre capacity for effective spill containment
- External size: 100 × 100 × 12 cm; minimum internal size: 91.5 × 91.5 × 12 cm
- Tough recycled polypropylene construction
- Low-profile design for easy placement under equipment
- Suitable for oils, fuels, lubricants, coolants and water
- Easy to clean and reusable
- Weather-resistant and suitable for indoor or outdoor use
Why Choose This Tray
-
- Helps prevent ground contamination and keep work areas tidy
- Supports good practice in spill control on sites and in workshops
- Eco-friendlier choice: made from recycled material
- Generous clearance around common generator footprints for easy cable and hose access
- No assembly required—ready to use out of the box
Typical Applications
-
- Generators on construction sites and events
- Plant rooms, service bays and maintenance areas
- Hire and rental fleets
- Temporary and standby power installations
Specifications
| Capacity | 100 Litres |
|---|---|
| External Dimensions | 100 × 100 × 12 cm |
| Minimum Internal Dimensions | 91.5 × 91.5 × 12 cm |
| Material | Recycled polypropylene |
| Generator Reference | STEPHILL SE10000 footprint: 84 × 58 cm |
| Profile | Low-profile for easy positioning |
| Use | Indoor or outdoor |
Fit Guidance
-
- Confirm your equipment footprint is within 91.5 × 91.5 cm for a comfortable fit.
- Allow clearance for cables, fuel lines and airflow when positioning equipment.
- Place on a level surface and check regularly for accumulated liquids.
Care and Use
-
- Inspect before use; empty and clean after spills to maximise service life.
- Use absorbents within the tray for faster clean-up if required.
- Avoid dragging when loaded; move when empty or use suitable lifting/handling aids.
- Dispose of collected liquids and absorbents in accordance with local regulations.
Measure your generator’s footprint. If it is no larger than 91.5 × 91.5 cm, it will fit within this tray. For reference, the STEPHILL SE10000 at 84 × 58 cm fits easily with room to spare.
The recycled polypropylene construction is suitable for capturing common workshop and site liquids such as oils, diesel, petrol, lubricants, coolants and water. Always check chemical compatibility for specialist fluids.
For safety, move the tray when empty. If relocation while loaded is unavoidable, use appropriate handling equipment and follow site safety procedures.
Note: Dimensions are approximate. Always verify fit and capacity for your specific application. Regular inspection and safe disposal practices are recommended to maintain spill control performance.
Drip Tray for STEPHILL Generator SE10000
- Brand: SERPRO
- Product Code: TRAYSE10000
- Availability: In Stock
-
£67.40